A single-person hyperbaric chamber has a built-in limit: one chamber, one user, one session at a time.
That may be enough for low-volume use. But for a wellness center, longevity clinic, recovery facility, or other commercial operation expecting regular HBOT demand, the question quickly becomes bigger than pressure.
How many people can the chamber actually serve?
BAHI O2 Space HBOT-150 is a multi-person hyperbaric chamber developed around that question. The standard system accommodates up to six users in one session, with custom configurations expandable up to 10 users. It combines pressure control up to 2.0 ATA, individual oxygen delivery, modular construction, and on-site assembly in one system.

The difference is not simply that the chamber is larger. It is designed around how a commercial facility actually operates HBOT.
1. One Pressurization Cycle Can Serve Up to 6 Users
With a single-person chamber, six users require six individual chamber sessions.
HBOT-150 multi-person hyperbaric chamber can accommodate up to six users simultaneously in its standard configuration. Custom-built configurations can expand capacity up to 10 users depending on the facility and available space.
That changes the basic operating model.
Instead of increasing capacity by adding more sequential sessions or installing multiple individual chambers, a facility can accommodate several users within the same pressurized environment.
For a commercial HBOT, that makes users per session an important specification alongside ATA, dimensions, and price.
2. Each User Has an Individual Oxygen Supply
Multi-person hyperbaric chambers raise an obvious technical question: how do several people receive oxygen at the same time?
HBOT-150 separates chamber pressure from oxygen delivery.
The chamber is pressurized with ambient air up to 2.0 ATA, while each user receives high-concentration oxygen through an individual mask. Exhaled air is routed through a separate exhaust pathway rather than released directly into the shared chamber environment.
This means multi-person operation does not require everyone to share one oxygen interface.
Each position has its own oxygen delivery while users share the same controlled pressurized space.

That combination is one of the main differences between simply building a larger chamber and engineering a true multi-person hyperbaric chamber system.
3. A Large Chamber Does Not Have to Mean a Difficult Installation
Large hyperbaric systems create a practical problem long before the first session begins.
They have to get into the building.
A chamber may fit inside the final room but still be impossible to move through the entrance, corridor, elevator, or other access points.
HBOT-150 uses a modular aluminum structure designed for sectional delivery and on-site assembly. Its configuration can also be expanded or reduced according to the available space and required capacity.
The standard chamber measures approximately 2,550 × 2,600 × 2,000 mm, with an approximate floor load of 320 kg/m². Access routes are therefore reviewed as part of installation planning rather than treated as an afterthought.
For an existing facility, this is an important distinction.
The building does not necessarily have to be designed around one fixed, fully assembled chamber. The chamber configuration can be planned around the facility.
4. It Is Designed as a Shared Hyperbaric Space
A multi-person hyperbaric chamber also needs a different interior concept.
HBOT-150 uses a tatami-style seating layout, with recliner configurations available. Wide viewing areas create a more open interior than a narrow individual enclosure, while a two-way intercom allows communication with the operator throughout the session.
This is especially relevant for facilities serving first-time users or people who may be uncomfortable spending a full session inside a confined single-person chamber.
The interior was not designed by simply placing more seats inside a pressure vessel.
It was developed as a space where several users can remain together during the same session.
5. Multi-User Operation Requires More Than Extra Seats
Increasing capacity also increases the importance of pressure control, communication, and safety systems.
HBOT-150 includes gradual pressurization and depressurization up to 2.0 ATA, an overpressure relief valve, emergency depressurization system, two-way intercom, and flame-resistant interior materials.
These features work alongside the individual oxygen supply and exhaust system.
That distinction is important when comparing commercial chambers.
A six-person chamber should not be evaluated simply by whether six people physically fit inside it. The real question is whether the system was engineered to manage multiple users, pressure, oxygen delivery, communication, and the interior environment together.
What Makes HBOT-150 Different?
HBOT-150 was not developed simply as a larger version of a single-person chamber.
It combines the specifications that become more important when HBOT moves into a commercial multi-user setting:
- Up to 6 users in one session
- Custom configurations expandable up to 10 users
- Adjustable pressure up to 2.0 ATA
- Individual oxygen masks for each user
- Separate oxygen supply and exhaust
- Modular aluminum construction
- Sectional delivery and on-site installation
- Tatami-style seating or recliner configuration
- Two-way operator communication
- Integrated pressure and emergency safety systems
For a facility, these specifications answer a more useful question than simply asking which chamber reaches the highest pressure:
How will this chamber work when people actually start using it every day?
Choosing a Multi-Person Hyperbaric Chamber
Before choosing a commercial HBOT system, start with the operating model.
How many users do you expect per day? How many should be accommodated per session? What pressure range do you need? How will oxygen be delivered? How much space is available? Can the chamber reach the installation room? Could capacity requirements change later?
Those questions should shape the chamber choice.
BAHI O2 Space HBOT-150 is designed for facilities that need HBOT to scale beyond one user at a time, without treating capacity, pressure, oxygen delivery, and installation as separate problems.
That is what sets the system apart.
Wondering why HBOT is getting more attention? Read more here!
